Research shows that solar heat and UV rays are responsible for humidity and discoloration of furniture in residential areas. 3M Solar Films Singapore is widely used as the cure to the very problem that is for protection from heat and harmful sun radiations.
A DIY believer would want to do the installation work himself, and thus, here is an easy way for the same that guides you to perfection while taking the safety measures.
Step 1: gather all the tools required for the experiment to be performed.
You will need baby shampoo, water in a spray bottle, a utility blade for cutting film, a razor for cutting glass, a measuring tape or ruler and some sponges and coffee filters for cleaning.
Step 2: take the precise measurements of the window with the help of measuring tape and cut the film accordingly with accuracy.
Step 3: thoroughly clean the window with the help of soapy solution of shampoo and water and rinse it with a sponge. Rub the coffee filter over the cleaned window for the clear aesthetic view.
Step 4: carefully hold the film and peel off the thin sheets it has to expose the adhesive side. Do not take it off entirely at once
Step 5: start with sticking the left corner of the film to the window gently. Move along diagonally downwards, leaving no cease or air bubble. (You can do it!)
Step 6: Firmly press the film after pasting to fix it there and trim off the edges left out with grace.
CAUTION: These guidelines are for you to try on a small scale like on car windows or ground floor windows of your house. For higher floors, let the professionals do the work to avoid any accidents.